Simple CNC Cutting Board
Curved-handle cutting board outline for a small desktop CNC, two halves nested for a 7.25 x 24 inch maple board; profile SVG plus an engrave variant.
SVGCC-BY-NC-SA 4.0
By plaroach (Instructables) · source
Templates / CNC · switch to Laser →
⌗ CNC templates
Toolpath-ready files for routers, mills and plasma tables: furniture, trays, signs, jigs and machine parts. Bit sizes and stock thickness are in each description.
27 files
Resin Honeycomb Serving Board
Hexagon honeycomb pattern DXF sized for a 1/8 inch end mill, used to pocket a 12 x 10 x 1/2 inch resin and wood serving board.
DXFCC-BY-NC-SA 4.0
By zeraus (Instructables) · source
CNC Machined Hazelnut Tray
Small pocketed wooden snack tray milled in an afternoon with an 8mm end mill and a 90-degree V-bit.
DXFCC-BY 4.0
By Christian Knuell (Instructables) · source
Board Game Piece Tray
Pocketed wooden organiser tray for game pieces and reference cards, cut on a CNC router; single DXF.
DXFCC-BY-NC-SA 4.0
By nimblewoodworks (Instructables) · source
Make a Birdhouse Using CNC
Beginner slot-together birdhouse drawn for a ShopBot with T-joints; two designs (a 5-piece minimal house and a larger one) plus an assembly diagram.
SVGCC0 1.0
By FABLAB Jubail (Instructables) · source
Mystery Clock, CNC wooden gear clock
Magnet-and-coil driven wooden pendulum gear clock with all wood parts CNC-cut; DXFs for the base and for 1/4, 1/2 and 3/4 inch stock parts.
DXFCC-BY-NC-SA 4.0
By DickB1 (Instructables) · source
Opendesk Pedestal, CNC plywood under-desk drawer unit
Opendesk's mobile pedestal drawer unit cut from a single 12mm plywood sheet, slot-together with castors. Full cutting sheet plus a test-cut sheet.
DXFCC0 1.0
By Lynton Pepper / Opendesk · source
Opendesk Wiki Booth, CNC plywood phone booth
Standing one-person booth / privacy nook cut from two 18mm plywood sheets and assembled with dowels and M6 bolts.
DXFCC0 1.0
By Lynton Pepper / Opendesk · source
Opendesk Lean Desk, 1600mm CNC plywood desk
Opendesk's flagship Lean Desk: a 1600 x 738mm slot-together plywood desk cut from four 18mm sheets, assembled with M6 bolts and dowels.
DXFCC-BY 4.0
By Joni Steiner and Nick Ierodiaconou / Opendesk · source
Opendesk Slim Chair, CNC plywood dining chair
A screw-assembled plywood chair cut from one 18mm sheet; 410 x 507 x 755mm.
DXFCC-BY 4.0
By Jose Pacheco / Opendesk · source
Opendesk Fin Bookshelf, CNC plywood shelving
A 400 x 1200 x 1118mm slot-together bookshelf cut from two 12mm plywood sheets.
DXFCC-BY 4.0
By Scarlett San Martin / Opendesk · source
WikiHouse Skylark 150 wall block (C-M-1)
One block from the WikiHouse Skylark modular plywood building system: layered DXF cut sheets for an 18mm wall block with dog-boned pockets and a production CSV. The full repo has about 520 DXFs for walls, floors, roofs and openings.
DXFCSVCC-BY-SA 4.0
By WikiHouse / Open Systems Lab · source
Pilable Furniture: modular plywood wardrobe cube
Parametric stackable wardrobe module designed in OpenSCAD; DXF batch sheets for CNC milling the solid planks and plywood slabs.
DXFTXTCC-BY 3.0
By charlyoleg · source
Sturdy CNC Plywood Step Stool
Step stool / extra seat designed to cut from one 4x4 ft sheet of 1/2 inch plywood with a 1/4 inch end mill; DXF per part plus nested SVG sheets.
DXFSVGCC-BY-NC-SA 4.0
By SiddharthS141 (Instructables) · source
CNC Router Bar Stool
Single-sheet slot-together plywood bar stool; one DXF cuts the whole stool.
DXFCC-BY-NC-SA 4.0
By SLO MakerSpace (Instructables) · source
Flip-Top CNC Table (Shapeoko XXL workbench)
Space-saving flip-top plywood workbench with a Shapeoko XXL bolted underneath; nested 4x8 DXF sheets plus spacer DXFs and the Fusion 360 model.
DXFF3DCC-BY-NC-SA 4.0
By JON-A-TRON (Instructables) · source
CNC Plywood Rolling Work Table
Sturdy rolling plywood worktable with 3D-printed PETG ankle braces at the legs; DXF, SVG, STEP and STL included.
DXFSVGSTEPSTLCC-BY-NC 4.0
By Tom Lauerman (Printables) · source
Simple CNC Vacuum Table
Shop-vac powered vacuum hold-down table split into quadrants, for holding thin foam and cardboard; DXFs for top, bottom and hose bracket plus the Fusion 360 file.
DXFF3DCC-BY-NC-SA 4.0
By Tucker B (Instructables) · source
CNC 3018 Pro wasteboard and clamps
MDF wasteboard for a 3018-class desktop router with SVG layers for blind-nut recesses, hold-down holes and guide lines, plus printable clamps and slot-nut holders.
SVGSTLCC-BY 4.0
By SkyTakes (Printables) · source
CNC hold-down clamps for T-slot tables
Low-profile T-slot hold-down clamp set for Openbuilds, MPCNC, Shapeoko and X-Carve style tables; DXFs for milling and STLs for printing. M8 or 5/16 inch T-bolts.
DXFSTLCC-BY-NC 4.0
By BuildModHack (Printables) · source
3-axis CNC touch plate
Corner-finding XYZ touch plate body (print it, or mill it from the STEP) wrapped in conductive tape; works with Universal Gcode Sender's probing module.
STLSTEPCC-BY-SA 4.0
By jeffbearer (Printables) · source
Maslow CNC sled and 6 inch calibration square
Official Maslow CNC 3/4 inch plywood sled cut file (plain SVG and a toolpathed version) and the 6-inch square test shape used for calibration, as SVG and G-code for a 1/4 inch bit.
SVGNCCC-BY-SA 4.0
By Bar Smith / Maslow CNC · source
oomlout three-axis CNC machine, MDF frame
The classic oomlout desktop 3-axis CNC build (10 x 14 x 4 inch envelope); nested DXF of all the 1/2 inch MDF frame parts for cutting on a CNC or laser.
DXFCC-BY-SA 4.0
By oomlout (Instructables) · source
Glowing Metal Space Fossil, CNC plasma art
Layered plasma-cut steel wall art inspired by Jurassic Coast fossils with resin-filled, LED-backlit cutouts; five DXF sheets.
DXFCC-BY-NC-SA 4.0
By waywardengineer (Instructables) · source
Brass Fireball hanging wall sculpture, plasma cut
Three-foot swirl wall sculpture in four independently hung brass pieces, cut on a CNC plasma table; DXF plus the original vector art.
DXFAICC-BY-NC-SA 4.0
By Bradley Rhodes (Instructables) · source
Snow anchors, plasma-cut backpacking stakes
Ultralight (20g) large-surface-area snow anchor and tent stake profile for plasma cutting from 24 gauge aluminum; a simple first plasma job.
DXFCC-BY-NC-SA 4.0
By firestarter0082 (Instructables) · source
CNC Epoxy Cribbage Board template
Cribbage board hole and track template in groups of five with skunk line, as a Carbide Create project and an SVG for any CAM; sized for a 4.5 x 12.5 inch board.
C2DSVGCC-BY-NC-SA 4.0
By Toolsthatbuild (Instructables) · source