Resin Honeycomb Serving Board
Hexagon honeycomb pattern DXF sized for a 1/8 inch end mill, used to pocket a 12 x 10 x 1/2 inch resin and wood serving board.
DXFCC-BY-NC-SA 4.0
By zeraus (Instructables) · source · 4 downloads
Templates / CNC · switch to Laser →
⌗ CNC templates
Toolpath-ready files for routers, mills and plasma tables: furniture, trays, signs, jigs and machine parts. Bit sizes and stock thickness are in each description.
21 files in DXF
CNC Machined Hazelnut Tray
Small pocketed wooden snack tray milled in an afternoon with an 8mm end mill and a 90-degree V-bit.
DXFCC-BY 4.0
By Christian Knuell (Instructables) · source · 4 downloads
Board Game Piece Tray
Pocketed wooden organiser tray for game pieces and reference cards, cut on a CNC router; single DXF.
DXFCC-BY-NC-SA 4.0
By nimblewoodworks (Instructables) · source · 4 downloads
Mystery Clock, CNC wooden gear clock
Magnet-and-coil driven wooden pendulum gear clock with all wood parts CNC-cut; DXFs for the base and for 1/4, 1/2 and 3/4 inch stock parts.
DXFCC-BY-NC-SA 4.0
By DickB1 (Instructables) · source · 24 downloads
Opendesk Pedestal, CNC plywood under-desk drawer unit
Opendesk's mobile pedestal drawer unit cut from a single 12mm plywood sheet, slot-together with castors. Full cutting sheet plus a test-cut sheet.
DXFCC0 1.0
By Lynton Pepper / Opendesk · source · 7 downloads
Opendesk Wiki Booth, CNC plywood phone booth
Standing one-person booth / privacy nook cut from two 18mm plywood sheets and assembled with dowels and M6 bolts.
DXFCC0 1.0
By Lynton Pepper / Opendesk · source · 8 downloads
Opendesk Lean Desk, 1600mm CNC plywood desk
Opendesk's flagship Lean Desk: a 1600 x 738mm slot-together plywood desk cut from four 18mm sheets, assembled with M6 bolts and dowels.
DXFCC-BY 4.0
By Joni Steiner and Nick Ierodiaconou / Opendesk · source · 15 downloads
Opendesk Slim Chair, CNC plywood dining chair
A screw-assembled plywood chair cut from one 18mm sheet; 410 x 507 x 755mm.
DXFCC-BY 4.0
By Jose Pacheco / Opendesk · source · 8 downloads
Opendesk Fin Bookshelf, CNC plywood shelving
A 400 x 1200 x 1118mm slot-together bookshelf cut from two 12mm plywood sheets.
DXFCC-BY 4.0
By Scarlett San Martin / Opendesk · source · 8 downloads
WikiHouse Skylark 150 wall block (C-M-1)
One block from the WikiHouse Skylark modular plywood building system: layered DXF cut sheets for an 18mm wall block with dog-boned pockets and a production CSV. The full repo has about 520 DXFs for walls, floors, roofs and openings.
DXFCSVCC-BY-SA 4.0
By WikiHouse / Open Systems Lab · source · 24 downloads
Pilable Furniture: modular plywood wardrobe cube
Parametric stackable wardrobe module designed in OpenSCAD; DXF batch sheets for CNC milling the solid planks and plywood slabs.
DXFTXTCC-BY 3.0
By charlyoleg · source · 12 downloads
Sturdy CNC Plywood Step Stool
Step stool / extra seat designed to cut from one 4x4 ft sheet of 1/2 inch plywood with a 1/4 inch end mill; DXF per part plus nested SVG sheets.
DXFSVGCC-BY-NC-SA 4.0
By SiddharthS141 (Instructables) · source · 26 downloads
CNC Router Bar Stool
Single-sheet slot-together plywood bar stool; one DXF cuts the whole stool.
DXFCC-BY-NC-SA 4.0
By SLO MakerSpace (Instructables) · source · 4 downloads
Flip-Top CNC Table (Shapeoko XXL workbench)
Space-saving flip-top plywood workbench with a Shapeoko XXL bolted underneath; nested 4x8 DXF sheets plus spacer DXFs and the Fusion 360 model.
DXFF3DCC-BY-NC-SA 4.0
By JON-A-TRON (Instructables) · source · 28 downloads
CNC Plywood Rolling Work Table
Sturdy rolling plywood worktable with 3D-printed PETG ankle braces at the legs; DXF, SVG, STEP and STL included.
DXFSVGSTEPSTLCC-BY-NC 4.0
By Tom Lauerman (Printables) · source
Simple CNC Vacuum Table
Shop-vac powered vacuum hold-down table split into quadrants, for holding thin foam and cardboard; DXFs for top, bottom and hose bracket plus the Fusion 360 file.
DXFF3DCC-BY-NC-SA 4.0
By Tucker B (Instructables) · source · 16 downloads
CNC hold-down clamps for T-slot tables
Low-profile T-slot hold-down clamp set for Openbuilds, MPCNC, Shapeoko and X-Carve style tables; DXFs for milling and STLs for printing. M8 or 5/16 inch T-bolts.
DXFSTLCC-BY-NC 4.0
By BuildModHack (Printables) · source
oomlout three-axis CNC machine, MDF frame
The classic oomlout desktop 3-axis CNC build (10 x 14 x 4 inch envelope); nested DXF of all the 1/2 inch MDF frame parts for cutting on a CNC or laser.
DXFCC-BY-SA 4.0
By oomlout (Instructables) · source · 5 downloads
Glowing Metal Space Fossil, CNC plasma art
Layered plasma-cut steel wall art inspired by Jurassic Coast fossils with resin-filled, LED-backlit cutouts; five DXF sheets.
DXFCC-BY-NC-SA 4.0
By waywardengineer (Instructables) · source · 27 downloads
Brass Fireball hanging wall sculpture, plasma cut
Three-foot swirl wall sculpture in four independently hung brass pieces, cut on a CNC plasma table; DXF plus the original vector art.
DXFAICC-BY-NC-SA 4.0
By Bradley Rhodes (Instructables) · source · 12 downloads
Snow anchors, plasma-cut backpacking stakes
Ultralight (20g) large-surface-area snow anchor and tent stake profile for plasma cutting from 24 gauge aluminum; a simple first plasma job.
DXFCC-BY-NC-SA 4.0
By firestarter0082 (Instructables) · source · 6 downloads