Kirkby Box (laser-cut tool box)
A simple glued plywood tool box cut on a laser cutter. Single-sheet SVG layout for 3mm plywood.
SVGCDRCC-BY-SA 4.0
By Simon Kirkby (via Obrary) · source · 6 downloads
Templates / Laser · switch to CNC →
◇ Laser templates: Boxes
Ready-to-cut SVG and DXF templates for laser cutters: boxes, living hinges, joints, signs, puzzles and mechanisms. Check the material thickness each file was drawn for.
6 files
Keepsake Box (double-wall, living-hinge sides)
Gift/keepsake box with double walls; the four side walls are one living-hinge piece bent around the corners. Engrave text or designs on the lid.
DXFPDFSKPCC-BY-SA 4.0
By Scott Austin (Obrary) · source · 10 downloads
Stackable Boxes (snap-together)
Plywood boxes that snap together without glue and stack on each other. Single SVG.
SVGCC-BY-SA 4.0
By Simon Kirkby (via Obrary) · source · 6 downloads
Stackable Storage Bins (two sizes)
Open-front parts bins in 4-inch and 6-inch widths that stack for shop, office or craft-room organization.
DXFPDFSKPCC-BY-SA 4.0
By Scott Austin (Obrary) · source · 17 downloads
XBee Protector Box
Small snap-fit acrylic enclosure to protect an Arduino XBee module; a good minimal electronics-enclosure starting point.
SVGCC-BY-SA 4.0
By Simon Kirkby (via Obrary) · source · 6 downloads
Boxes.py: simple finger-joint boxes
A plain finger-jointed open box and a universal lidded box generated by the Boxes.py generator, provided as ready-to-cut SVGs. Good starter templates; make custom sizes at boxes.hackerspace-bamberg.de.
SVGGPL-3.0-or-later
By Florian Festi (Boxes.py) · source · 5 downloads